1 Axis Stepper CNC Kit 8.0Nm(1132.89oz.in) Nema 34 Stepper Motor & Driver & 60V Power Supply
A$123.88
5 + A$120.27
10 + A$116.85
50 + A$113.64
100 + A$110.58
- In Stock: 10000
- Model: 1-DM860I-S80
- Gross Weight: 5.01kg
Available Options
Ships within 24 hours!
Ships within 24 hours basically means that your product will be shipped out or dispatched from our warehouse within 24 hours if it has enough stock. Read more.
This CNC kit included:
- 1 x DM860I: Digital Stepper Drive 2.4-7.2A 20-80VDC for Nema 34 Stepper Motor CNC Kit
- 1 x 34HS39-6004S: Nema 34 Stepper Motor 8.0Nm(1132.89oz.in) 6.0A 86x86x98mm 4 Wires
- 1 x LE-350-60: 350W 60V 5.8A 115/230V Switching Power Supply
We will gradually replace the power supplies in this kit with the latest model: LE-350-60. The new power supply is an ultra-thin power supply optimized for industrial automation. During the replacement process, each warehouse may randomly ship new and old versions.
Motor Specification
- Manufacturer Part Number: 34HS39-6004S
- Number of phase: 2
- Step Angle: 1.8deg
- Holding Torque: 8.0Nm(1132.89oz.in)
- Rated Current/Phase: 6.0A
- Phase Resistance: 0.55ohms± 10%
- Inductance: 4.6mH±20%(1KHz)
- Frame Size: 86 x 86mm
- Body Length: 98mm
- Shaft Diameter: Φ14mm
- Shaft Length: 32mm
- Keyway Shaft Length: 25mm
- Number of Leads: 4
- Lead Length: 500mm
- Insulation Class: B 130°C[266°F]
Driver Specification
- Output Peak Current: 2.4~7.2A(6.0RMS)
- Input Voltage: +20~80VDC
- Logic Signal Current: 7~16mA(Typical 10mA)
- Pulse Input Frequency: 0~200kHz
- Pulse Width: 2.5μS
- Isolation Resistance: 100MΩ
- Support PUL/DIR and CW/CCW modes
- Automatic idle-current reduction
- Suitable for 2-phase and 4-phase motors
- Soft-start with no "jump" when powered on
- Over-voltage, over-curren protection
- Anti-Resonance provides optimal torque and nulls mid-range instability
- Pulse input frequency up to 200KHz, TTL compatible and optically isolated input
- 8 selectable peak current including 2.40A, 3.08A, 3.77A, 4.45A, 5.14A, 5.83A, 6.52A, 7.20A
- Motor auto-identification and parameter auto-configuration technology, offers optimal responses with different motors
- 16 selectable microstep resolutions including 400, 800, 1600, 3200, 6400, 12800, 25600, 51200, 1000, 2000, 4000, 5000, 8000, 10000, 20000, 40000
- Multi-Stepping allows a low resolution step input to produce a higher microstep output, thus offers smoother motor movement, works well as Cnc drive as well.
Power Specification
- Part Number: LE-350-60
- Input Voltage: 115/230VAC±20%
- Input Frequency: 47-63Hz
- Input Current: 40A/230VAC
- Output Voltage: 60V
- Output Current: 5.8A
- Rated Output Power: 350W
- Leakage Current: <0.5mA/230VAC
- Dimensions: 215*115*30mm(L*W*H)
- Internal EMI filter
- High efficiency low cost
- Forced air cooling by built-in DC fan
- Over current, over voltage, short circuit and overheat protections
Connection
A+ |
A- |
B+ |
B- |
Black |
Green |
Red |
Blue |
Electrical Specification | |
Input Voltage Reference(V) | 24 - 80DC |
No. of Phase | 2 |
Product Type | Open Loop Stepper Kit |
Holding Torque(Ncm) | 800 |
Holding Torque(oz.in) | 1132.89 |
Number of Axes | 1 |
Physical Specification | |
Frame Size(mm) | Nema 34 (86 x 86) |
Inventory Method | Dedicated Inventory |
Output Shaft Type | Keyway |
Shaft Diameter(mm) | 14 |
Product Series | TS Series |
Tags: arduino stepper motor kit,
Arduino,
Output Shaft Type: Keyway,
Shaft Diameter(mm): 14,
Holding Torque(Ncm): 800,
Holding Torque(oz.in): 1132.89,
Frame Size(mm): Nema 34 (86 x 86),
No. of Phase: 2,
Product Type: Open Loop Stepper Kit,
Product Series: TS Series,
Number of Axes: 1,
Input Voltage Reference(V): 24 - 80DC,
Inventory Method: Dedicated Inventory