BD600 Series VFD 2HP 1.5KW 7.0A Single/Three Phase 220V Variable Frequency Drive

0 reviews - Write a review

A$0.00

In Stock: 1
Model: BD600-1R5G-2
Gross Weight: 2.06kg
Certificated: ISO, CE

Qty

Add to Cart

Question

Add to Wish List Compare this Product

This product has a minimum quantity of 999

This VFD with power 2HP(1.5Kw) and single/three phase 220V input voltage. The BD600 series is a high performance Vector Control Variable Frequency Drive(VFD), they are widely used in application of: Metal processing, CNC machine tools, Wire drawing machines, Boiler blower, Induced draft fan, Coal mine underground exhaust fan, Municipal engineering, Counter-cyclone, Centrifugal fan, Circulating water pump, Make-up water pump, Oil field injection water pump, Oil transfer pump, music fountain, Papermaking equipment, Chemical industry, Pharmaceutical industry, Textile industry, etc.

Due to some reasons, we have temporarily stopped producing and selling this product. This product cannot be ordered. The alternative product is EV200-1500G-S2.

Key Specification

Input Voltage: 1-Phase/3-Phase 220VAC±15%
Input Frequency: 47～63Hz
Input Current: 1-Phase 14.0A, 3-Phase 8.4A
Input Power factor: ≥95%
Power: 2HP(1.5Kw)
Output Current: 7.0A

Operating Environment
Store Temperature	-20℃～60℃
Variable Frequency Drive Specification
Input Voltage	1PH 220V / 3PH 220VAC
Input Frequency	47 - 63Hz
Input Current	14A(1PH) / 8.4A(3PH)
Input Power factor	≥95%
Output Power	2HP / 1.5KW
Output Current	7.0A
Control Modes	V/F control, non-PG vector control(SVC), PG vector control(FVC)
V/F Control	Line, Multiple point, square V/F curve, V/F separation
Operation Command Mode	Keypad control, Terminal control, Serial communication control
Frequency Reference Source	Digital, analog, pulse frequency, serial communication, multi-step speed, simple PLC and PID The combination of multi-modes and the different modes can be switched
Overload Capacity	G type: 150% rated current 60s, 180% rated current 3s; P type: 120% rated current 60s, 150% rated current 3s
Start Torque	G type: 0.5Hz/150%(SVC), 0Hz/180%(FVC); P type: 0.5Hz/100%
Speed Adjusting Range	1:100(SVC), 1:1000(FVC)
Speed Control Accuracy	±0.5%(SVC), ±0.02%(FVC)
Carrier Frequency	0.5 to 16.0kHz; automatically adjust carrier frequency according to the load characteristics
Frequency Resolution	0.01Hz(Digital setting); maximum frequency x 0.025%(Anolog setting)
Torque Boost	Automatic torque boost; manual torque boost 0.1~30%
Acceleration and Deceleration Mode	Line or S-curve, 4 types of acceleration/deceleration time with the range of 0.0~6500.0s
DC Brake	Supports starting and stopping DC brake
Jogging Control	0.0Hz~50.00Hz(Jog frequency range); 0~6500.0s(Jog Acc/Dec time)
Simple PLC & Multi-step Speed Operation	Built-in PLC or control terminal, 16 steps speed can be set
Built-in PID	Built-in PID control to easily realize the closed loop control for the process parameters (such as a pressure, temperature, flow, etc.)
Automatic Voltage Regulation(AVR)	Automatically maintain a constant output voltage when the voltage of electricity grid changes
Common DC Bus	Multiple inverters can use a common DC bus(Common DC bus function)
Traverse Control	Multiple triangular pulse frequency control(Traverse control function)
Fixed Length Control	Setting length control
Timing Control	0~6500min(Setting time range)
Input Terminals	a. Supports high speed pulse input, b. 1 Analog voltage input 0~10VDC, c. 2 Voltage input 0~10VDC or current input 0~20mA
Output Terminals	a. 1 Open collector output, it can be extended to 1 high speed pulse output, b. 2 Relay outputs, c. 2 Analog output: voltage output 0~10VDC or current output 0~20mA
Protection Class	IP20
Humidity & Temperature	90%RH or less (no-condensation), -10℃～40℃.Inverter will be derated if ambient temperature exceeds 40℃
Vibration	Under 20Hz 9.8m/s(1G), Over 20Hz5.88m/s(0.6G)
Store Environment	≤1000M, indoor(no corrosive gas and liquid)
Cooling Mode	Forced air-cooling
Physical Specification
Inventory Method	Dedicated Inventory