Digital Stepper Driver 2.4-7.2A 18-80VAC or 36-110VDC for Nema 34 Motor
A$58.16
5 + A$56.46
10 + A$54.86
50 + A$53.34
100 + A$51.91
- In Stock: 10000
- Model: DM860T
- Gross Weight: 0.71kg
- Certificated: ISO, CE, UKCA
Available Options
Ships within 24 hours!
Ships within 24 hours basically means that your product will be shipped out or dispatched from our warehouse within 24 hours if it has enough stock. Read more.
The DM860T is a fully digital stepper driver developed with advanced DSP control algorithm based on the latest motion control technology. It has achieved a unique level of system smoothness, providing optimal torque and nulls mid-range instability. Its motor auto-identification and parameter auto-configuration feature offers quick setup to optimal modes with different motors. Compared with traditional analog drives, DM860T can drive a stepper motor at much lower noise, lower heating, and smoother movement. Its unique features make DM860T an ideal choice for high requirement applications.
At present, only Chinese warehouses have the random delivery of old and new models of DM860T. DM860T shipped from other warehouses are the newest version.
Key Features
- Automatic idle-current reduction
- Suitable for 2-phase and 4-phase motors
- Support PUL/DIR and CW/CCW modes
- Over-voltage, over-curren protection
- Soft-start with no "jump" when powered on
- 5V/24V logic voltage selector, default setting 24V
- Anti-Resonance provides optimal torque and nulls mid-range instability
- Pulse input frequency up to 200KHz, TTL compatible and optically isolated input
- 8 selectable peak current including 2.40A, 3.08A, 3.77A, 4.45A, 5.14A, 5.83A, 6.52A, 7.20A
- Motor auto-identification and parameter auto-configuration technology, offers optimal responses with different motors
- Multi-Stepping allows a low resolution step input to produce a higher microstep output, thus offers smoother motor movement
- 16 selectable microstep resolutions including 400, 800, 1600, 3200, 6400, 12800, 25600, 51200, 1000, 2000, 4000, 5000, 8000, 10000, 20000, 40000
Electrical Specifications:
- Output Peak Current: 2.4~7.2A(6.0RMS)
- Logic Signal Current: 7~16mA(Typical 10mA)
- Pulse Input Frequency: 0~200kHz
- Pulse Width: 2.5μS
- Isolation Resistance: 100MΩ
- Input Voltage: +18~80VAC or 36~110VDC(DC +/- power can be connected in any order)
Operating Environment and other Specifications(Tj = 25℃/77℉):
- Cooling: Natural Cooling or Forced cooling
- Environment: Avoid dust, oil fog and corrosive gases
- Ambient Temperature: 0℃ - 65℃
- Humidity: 40%RH-90%RH
- Operating Temperature: -10℃ - 45℃
- Vibration: 10-55Hz / 0.15mm
- Storage Temperature: -20℃ - 65℃
- Weight: Approx.580g(20.46oz)
Electrical Specification | |
Alarm Output | Yes |
Analog Input | No |
Brake Output | Yes |
Control Modes | Pulse Mode |
Encoder Feedback | No |
Input Voltage Reference(V) | 24 - 80AC / 36 - 110DC |
Input Voltage(V) | 18 - 80AC / 36 - 110DC |
Max. Output Current RMS(A) | 6 |
No. of Phase | 2 |
Product Type | Driver Only |
Output Current(A) | 2.4 - 7.2 |
Microstep(Steps/rev.) | 400 - 51200 |
Max. Pulse Input(kHZ) | 200 |
Pulse Width(μs) | 2.5 |
Physical Specification | |
Installation Type | Split |
Inventory Method | Dedicated Inventory |
Weight(g) | 580 |
Tags: Digital Stepper Driver,
Stepper Motor Driver,
Weight(g): 580,
Output Current(A): 2.4 - 7.2,
Input Voltage(V): 18 - 80AC / 36 - 110DC,
Microstep(Steps/rev.): 400 - 51200,
Max. Pulse Input(kHZ): 200,
Pulse Width(μs): 2.5,
No. of Phase: 2,
Product Type: Driver Only,
Product Series: T Series,
Control Modes: Pulse Mode,
Integrated with Pulser: No,
Encoder Feedback: No,
Input Voltage Reference(V): 24 - 80AC / 36 - 110DC,
Max. Output Current RMS(A): 6,
Alarm Output: Yes,
Brake Output: Yes,
Inventory Method: Dedicated Inventory