This bipolar pancake Nema 11 stepper motor with step angle 1.8deg and size 28x28x9.5mm. It has 4 wires, each phase draws 0.5A, with holding torque 1Ncm(1.4164oz.in).
Electrical Specification
Manufacturer Part Number: 11HS04-0504S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Tor..
The DM2282T is a fully digital stepper drive developed with advanced DSP control algorithm based on the latest motion control technology. It has achieved a unique level of system smoothness, providing optimal torque and nulls mid-range instability. Its motor auto-identification and parameter auto..
This model is dual shaft Nema 11 Bipolar stepper motor,it with step angle 1.8deg and size 28x28x31.5mm. It has 4 wires, each phase draws 0.67A at 3.75V, with holding torque 7Ncm(9.91oz.in).
Electrical Specification
Manufacturer Part Number: 11HS12-0674D
Motor Type: Bipolar Stepper
Step Ang..
This Nema 11 stepper motor with 31mm body and 0.67A rated current, integrated a planetary gearbox of 5.18:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque. The rear shaft diameter is 3.9mm.
Electrical Specification
Manufacturer Part..
The 3DM2283T is a fully digital stepper drive developed with advanced DSP control algorithm based on the latest motion control technology. It has achieved a unique level of system smoothness, providing optimal torque and nulls mid-range instability. Its motor auto-identification and parameter aut..
This mini nema 11 bipolar stepper motor with step angle 1.8deg and size 28x28x33mm. It has 4 wires, each phase draws 0.67A at 3.8V, with holding torque 7Ncm(9.91oz.in).
Electrical Specification
Manufacturer Part Number: 11HS12-0674S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding ..
This Nema 11 stepper motor with 31mm body and 0.67A rated current, integrated a planetary gearbox of 26.85:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque. A 3.9mm diameter rear shaft with screw holes on rear endcap are available.
..
DMRS Series are stepper driver based on standard Modbus RS485 protocol, using RS485 communication can network up to 31 axes. They built-in PR feature with 16-segment position table(PR Mode) can save additional controllers in most of point-to-point applications, to greatly enhance system reliability ..
This Nema 11 stepper motor with 31mm body and 0.67A rated current, integrated a planetary gearbox of 99.548:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque. A 3.9mm diameter rear shaft with screw holes on rear endcap are available.
..
This mini nema 11 bipolar stepper motor with step angle 1.8deg, short shaft 9.5mm and size 28x28x33mm. It has 4 wires and holding torque 7Ncm(9.91oz.in). It is intended for use with Nema 11 EG series planetary gearboxes.
Electrical Specification
Manufacturer Part Number: 11HS12-0704S
Motor ..
This unipolar stepper motor with step angle 1.8deg and size 28x28x31.5mm. It has 6 wires, each phase draws 0.95A at 2.66V, with holding torque 4.3Ncm(6.1oz.in). A 10mm rear shaft was for encoder or equals.
Electrical Specification
Manufacturer Part Number: 11HS12-0956D
Motor Type: Unipolar ..
DMRS Series are stepper driver based on standard Modbus RS485 protocol, using RS485 communication can network up to 31 axes. They built-in PR feature with 16-segment position table(PR Mode) can save additional controllers in most of point-to-point applications, to greatly enhance system reliability ..